If you want to POST REVIEWS or if you want to RATE REVIEWS, you need to be logged in as a ShortyUSA Registered User.
Reviewer: djscottish
Rank: GEN
Location: Lyndhurst, OH
read all my reviews
| | 41 out of 44 people rated the following review helpful: |
 - Must have for snipers, March 04, 2006 This bipod is very solid (all metal) and is a great accessory for any sniper. Its not the best for when your moving and have to fire, because it adds weight to the front of the gun, but that’s not a problem. The ability to attach it to the weaver rail makes it easy to remove, depending on the situation. The legs are spring-loaded and extend a good few inches, allowing you to adjust it to your height. The joint where it attaches swivels a little bit, not tons, but enough to adjust your aim without having to pick up the whole rifle. The only problem I could find with the bipod was that there are two screws that hold the legs on to the rail claw. If the screws come loose, it could just fall apart during a battle. To prevent this, I just tighten them before every battle. Over all, this is a great accessory for snipers and even assault rifle AEGs.
|
| Do you want to rate this review as helpful or not? You have to be logged in as a ShortyUSA Registered User! |
|
Reviewer: shildner
Rank: GEN
Location: Leesburg, VA
read all my reviews
| | 31 out of 34 people rated the following review helpful: |
 - Good Bi-Pod, January 10, 2006 This came in the M324 Sniper package. It is a good bi-pod, with adjustable feet. I did notice that there is a nut and bolt that allows the mount to slightly swivel. Be aware that this nut and bolt needs to be checked before you go into the field. Lucky for me, mine fell off inside, and I was able to find the pieces. It pays to know your gear.
Hope this helps.
|
| Do you want to rate this review as helpful or not? You have to be logged in as a ShortyUSA Registered User! |
|
Reviewer: airforcemu
Rank: BG
Location: gold canyon, AZ
read all my reviews
| | 20 out of 26 people rated the following review helpful: |
- Solid aluminum......., November 24, 2005 This bipod is an exelent example of UTG's quality of product. It is made out of SOLID aluminum, one of the most efficiant metals to use. It is verry solid, has a high tolerance for droping, and is light as a feather, in metal terms. I wouldn't get the one that attaches to your barrel unless you have to, it is a lot easier to unscrew the mount than to unclip the mount from your barrel, the barrel mounted one seems to have less lift than the rail mounted one, and The added stress on your barrel dosent help. Just get the rail mounted one, well worth the extra 5$.
-Airforcemu
|
| Do you want to rate this review as helpful or not? You have to be logged in as a ShortyUSA Registered User! |
|
Reviewer: airsoft ak-49 dude
Rank: LTG
Location: Palmer, AK
read all my reviews
| | 16 out of 21 people rated the following review helpful: |
- pretty nice, January 28, 2006 My friend got this with his UTG M324 sniper it works good but it always falls apart because it is loose. don't worrie all you have to do is take an allen wrench and scew it to the rail mount.
|
| Do you want to rate this review as helpful or not? You have to be logged in as a ShortyUSA Registered User! |
|
Reviewer: the bear
Rank: CPT
Location: moorestown, NJ
read all my reviews
| | 15 out of 20 people rated the following review helpful: |
 - alright...., March 03, 2006 I got this with my utg m324. I love the 2 different sizes and all but after an hour or two the thing started to swivel which i do not really like. I tightened it with a screwdiver but there was nothing doing. Even after that it still swivels. It is good and bad so read some other reviews if you can't decide.
pros:
nice weight
realistic
durable
extendo-legs
cons:
screw becomes loose and swivels (could be a pro I guess but I don't like it)
the spring loaded legs are kinda hard to get back in with a gun over top but I guess I'm still adjusting
|
| Do you want to rate this review as helpful or not? You have to be logged in as a ShortyUSA Registered User! |
|
Reviewer: I am Jaybird
Rank: GEN
Location: West Chester, PA
read all my reviews
| | 15 out of 26 people rated the following review helpful: |
- Decent, but not stable., January 08, 2007 Ok people lets remember, aluminum is what soda cans are made of. Not the most stable thing in the world. As for holding your gun, it does a fairly good job and its not too heavy. I'd say it's a fairly good Bi-Pod
|
| Do you want to rate this review as helpful or not? You have to be logged in as a ShortyUSA Registered User! |
|
Reviewer: jeffer
Rank: GEN
Location: wellington, FL
read all my reviews
| | 13 out of 15 people rated the following review helpful: |
- ...YES, July 01, 2008 ....TRUE...the screws/open & have come loose..i coated the reads with a liquid like dope..no more loose..make sense..again/please /be kind /to/the /new-ranks..10Q...jeffer..(as luck would have it..i bought another m324..it has like a winter snow-pattern..looks crazy in south Florida)
|
| Do you want to rate this review as helpful or not? You have to be logged in as a ShortyUSA Registered User! |
|
Reviewer: Trigger2424
Rank: LTG
Location: Naperville, IL
read all my reviews
| | 12 out of 14 people rated the following review helpful: |
- Snipers have to have one, February 20, 2006 Not only does this bipod keep you balanced on your shot, it's also fully adjustable to multiple heights. Full-metal construction means it can take a massive beating, too. A definite must-have for shooters with a weaver rail mount on their rifle.
|
| Do you want to rate this review as helpful or not? You have to be logged in as a ShortyUSA Registered User! |
|
Reviewer: grimsoldier
Rank: GEN
Location: Bartlett, TN
read all my reviews
| | 12 out of 13 people rated the following review helpful: |
- Its wonderfull, March 16, 2006 This bipod actually came with my UTG sniper rifle and I like it ok. I'm not too thrilled with the whole swivel thing. If the legs are in the folded position, it slides from side to side when you run. It is very sturdy however, and keeps the weapons shot very steady. So if you need a bipod, I suggest this one.
|
| Do you want to rate this review as helpful or not? You have to be logged in as a ShortyUSA Registered User! |
|
Reviewer: airforcemu
Rank: BG
Location: gold canyon, AZ
read all my reviews
| | 11 out of 15 people rated the following review helpful: |
- Solid aluminum......., November 24, 2005 This bipod is an exelent example of UTG's quality of product. It is made out of SOLID aluminum, one of the most efficiant metals to use. It is verry solid, has a high tolerance for droping, and is light as a feather, in metal terms. I wouldn't get the one that attaches to your barrel unless you have to, it is a lot easier to unscrew the mount than to unclip the mount from your barrel, the barrel mounted one seems to have less lift than the rail mounted one, and The added stress on your barrel dosent help. Just get the rail mounted one, well worth the extra 5$.
-Airforcemu
|
| Do you want to rate this review as helpful or not? You have to be logged in as a ShortyUSA Registered User! |
|
(Listed above are the first 10 rated most helpful reviews for this item)
|
Click here to start our 24/7 Helper Console!
